ROHN 340028 3/16 to 1/2 inch Strand Down Guy Wire Ground Clamp 438ALC

ROHN CW4ST #4 Stranded Copper Wire
10 feet of #4 Stranded Copper wire clamped to ROHN Tower down guys for attachment to ground rod in REV. F grounding kits and arrays. Priced and sold by the foot in continuous roll (10 ft. per unit ordered)...

ROHN IWRC 7/16 6x25 EIP IWRC RRL Wire Rope 
New REV. G Grounding cable for use on ROHN Tower Systems. Used for grounding both the tower and down guy components with CPC clamps and Galvanized ground rods (not included). Price is per foot. Enter number of feet desired in quantity box above.

GR8GROD 5/8" x 10' Galvanized Ground Rod

A Galvanized ground rod that is 5/8 in. nominal in diameter with a length of 10 ft . Zinc-Coated exteriors are hot-dip galvanized for solid protection against corrosion , The ground rod meets NEC , UL and in accordance with ASTM® , use 5/8 inch Ground Rod Clamp for #6, #4 copper, use 3/4 inch clamp with 7/16 inch IWRC wire rope (sold separately). Suitable for burial after attachment (see our self amalgamating sealant tape). Use for REV. F Grounding of Tower Base and Down Guys or Telescopic Antenna Masts. Select a ground rod clamp based on conductor to be attached (see details).......

ROHN R-340021 5/8" x 10' Bonded Ground Rod
Uniform Electrolytic Copper On Steel Core, Minimum Copper Depth 10 Mils, UL Listed. Use 5/8 inch Ground Rod Clamp for #6, #4 copper, use 3/4 inch clamp with steel wire rope (sold separately). Suitable for burial after attachment (see our self amalgamating tape sealant). Use for REV. F Grounding of Tower Base and Down Guys or Telescopic Antenna Masts. Select a ground rod clamp based on conductor to be attached (see details)...

GCA-1 Alumnium Ground Clamp

Use this Alumnium  ground clamp to create an electrical ground between a 1/2 to 1-1/4"  inch Tower Leg ,water pipe, copper water pipe or copper ground wire...

ROHN AGK1G Tower Down Guy Wire Grounding Kit
REV. F Kit. Comprises enough material to ground 3 Down Guy Anchor locations. Comes with (3) Ten Foot Ground Rods, (3) Ground Rod Clamps and 45 Feet ( 3 x 15' ) of #4 Stranded Copper Wire. Select Guy Wire Ground Clamps by Guy Wire size below (see Accessories for this Item)...

ROHN AGK1GGX Tower Down Guy Anchor Rod Ground Kit
REV. G Kit. Comprises enough material to ground 3 Anchors. Comes with (3) Ten Foot Ground Rods, (3) Ground Rod Clamps , (3) CPC.5/.75 Anchor Rod Clamp (not included in separate kits from ROHN, but included here) and (3)10 Feet of 7/16  Wire Rope...
This Item Ships LTL Freight ONLY...

ROHN CPC.5/.75 Guy Anchor Rod Ground Clamp
Used for Ground Connection to ROHN Tower down guy concrete Anchor Rods (0.375 to 1.00 inch actual OD range). Lug connects to Solid/Stranded Copper or Woven Rope ground wire utilized in AGK1GGX REV. G Grounding Kits (not included)...