ROHN BPC45G Concrete Base Plate for 45G Guyed Tower
Made in the USA!
The ROHN BPC45G uses a 3/4" x 12" pier pin to align the plate to the concrete slab and prevents Lateral Movement for ROHN 25G Guyed Tower installations only. This ROHN Base Plate is 24" x 20" Square and 5/16 Thick, allows the ROHN 45G Tower to be Mounted onto an existing or new Concrete Pier, Pad or Slab but Cannot be Used as a Self Supporting Base Plate.(see 45GSSB)
The Pier Pin as utilized with this Concrete Base Plate is not really a structural load member, but simply a means of fixating the position of the base Plate as to prevent lateral movement during and after Tower Installation. Consult an Engineer for various substitution options. Hole appearing in corner of plate can be utilized for Ground Rod Location.
All 45G Tower Installations should be temporarily Guyed during erection.
Click on the "More Info" or "Spec. Sheet" for more ROHN 45G Tower Details.
FOR USE WITH GUYED TOWERS ONLY
IT SHALL BE THE CUSTOMER'S OR INSTALLER'S RESPONSIBILITY TO PROVIDE STRUCTURALLY ADEQUATE SUPPORTS FOR PIER and ANCHOR CONNECTIONS.
IT MAY ALSO BE NECESSARY FOR THE CUSTOMER/INSTALLER TO DETERMINE THAT THE INSTALLATION COMPLIES WITH LOCAL CODES.
Print this page
Download