GCC15-12R Guy Strain Insulator Clevis to Clevis with Roller 15,000 lbs
MacLean
Fiberglass Rod with Iron Galvanized Fittings End Fittings:
Clevis - Clevis w/Roller
Rod Size - in - 5/8
Rod Length - in - 12.00
Overall Length - in - 22.25
Flashover Dry/Wet - kV - 140/70
Strength - lb - 15,000
Roller Groove Radius: 5/16"
Fiberglass rod guy strain insulators with 15,000 lb Min. Ultimate Strength Rating, 12" Long (Overall length 22.25") Clevis to Clevis End Fittings. Guy strain insulators are installed in-line with down guys on Guyed Towers. Hot Dipped Galvanized
Features:
Fiberglass rod (dielectric) coated with UV (ultraviolet) inhibitor for long life
Provides electrical insulation to the guy to prevent leakage currents to the anchor
Prevents reflection of transmitted signals
Hot dip galvanized to ASTM A153 end fittings to attach to the tower and guy
Application:
Installed in line with down guy on tower
DownloadEHS Strand Down Guy Wire for Towers
3 Star Stocks EHS 7 Strand Guy Wire for use on ROHN 25G, 45G, 55G and 65G Guyed Towers Systems as well as Utility OSP Cabled and Fiber Systems. Our EHS Tower Guy wire comes in 100', 250', 500',1000, in coils or reels and 5000 FT wooden spools. PLP-GWD Guy wire Dispenser available (optional). It is recommended that "Initial Tension" (10% of Maximum Limit) is attained with the Turnbuckle travel extended prior to tensioning with same. Annex the Data shown in the Table below when referencing guy charts shown for ROHN Towers:
620 & 618 Guy Wire for Telescopic Masts
Our 6/18 (6 strand 18AWG) and 6/20 (6 strand 20AWG with or with out Plastic Coating) guy wire comes in lengths of 50', 100', 250', 500' up to 1000' FT.
Choose from 6/18 and 6/20 for Guying Telescopic Antenna Masts. Also, Complete Telescopic Guy Wire Kits are also available.
Sorry, we are offline,
click here to send us message
